Making Electronic Circuits

This week it was time to finish the aluminum cube. we had to finish sanding, drilling and reaming. However, we did not have much more time and we needed to start the electronic circuits.

The first circuit consists of LEDs which had to be illuminated with a lapse of time. For this, we needed to solder resistors and condensers to adapt the intensity and voltage to the LEDs. Once the circuit was finished we had to test it with a 9 volt power supply, and here is the test...

Finally, the second circuit is the same as the first circuit, but replacing an LED with a resonator. The process is exactly the same as the first circuit and synchronize that the LED lights when the resonator sounds. After playing it with the same power supply as before and it would be done.

This is a small summary of what we have done this week. Thank you for your attention and see you soon